Thyristor


Thyristors are a kind of semiconductor device. They have the same characteristics as solid-state components made of silicon, such as transistors and diodes. This, at times, makes it difficult to distinguish between thyristors and the other products. There are different types of thyristors available, and you can get some of the best products on Heatcon. What differentiates one thyristor from another could be a small detail. These helps design specific circuits. It is, therefore, necessary to know the features, drawbacks, and the relationship of the thyristor with the circuit to make things work smoothly.

A thyristor has four layers, which alternate between the P-type and the N-type of semiconductors. The most basic thyristors have three terminals. It includes the negative terminal or cathode, the positive terminal or anode, and the gate terminal or the control terminal. The thyristor primarily acts as a switch that controls the flow of electric power and functions as a switch. The device is used in diverse electric circuits, ranging from power transmission lines to something like alarms. Heatcon manufactures advanced and quality thyristors used across a wide range of industries for different functions.

ANALOG THYRISTOR POWER CONTROLLERS HI-8003 -TP-C3-ED

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 3 PHASE 415VAC with Neutral , 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:100KW)
MAXIMUM LOAD CURRENT : 300A
CONTROLLING INPUT : 4-20mA(0-10VDC)
TYPE OF CONNECTION : STAR/DELTA
blg-dtl-img1.jpg

DIGITAL POWER CONTROLLERS – HI-8003-DP-C3

Features

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

DESCRIPTION

SYSTEM INPUT : 3 PHASE 415VAC , 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement
MAXIMUM LOAD CURRENT : 150 Amps
CONTROLLING INPUT : 4-20mA/0-10VDC
TYPE OF CONNECTION : STAR/DELTA
blg-dtl-img1.jpg

DIGITAL POWER REGULATOR – 2-PHASE, HI-8003 M

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 2 PHASE 440VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:30KW)
MAXIMUM LOAD CURRENT : 50A
CONTROLLING INPUT : 4-20mA(or0-10VDC)
blg-dtl-img1.jpg

HI-8003A40 – ANALOG THYRISTOR POWER CONTROLLER

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 1 PHASE 230VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:5KW)
MAXIMUM LOAD CURRENT : 40A
CONTROLLING INPUT : 4-20mA( 0-10VDC)
blg-dtl-img1.jpg

THYRISTOR BASED DIGITAL POWER CONTROLLER – HI-8003 M

Features:

SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
ENABLE SWITCH: Optional Enable Switch is also provided.

Specifications

SYSTEM INPUT : 1 PHASE 230VAC ±10% 50HZ
MODE OF CONTROL : PHASE ANGLE CONTROL
SCR CONFIGURATION : FULL CONVERTER SUITABLE FOR PHASE ANGLE CONTROL
TYPE OF LOAD : RESISTIVE / INDUCTIVE
POWER HANDLING : According to customers requirement(Maximum:5KW)
MAXIMUM LOAD CURRENT : 40A
CONTROLLING INPUT : 4-20mA(or0-10VDC)
blg-dtl-img1.jpg

© 2020 Heatcon Sensors (P) Ltd..| All Rights Reserved.